淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Design Verification >
   Design Verification Commands >
       Geometry Checking Commands           


Geometry Checking Commands

The commands described in this section test the geometry of provided DV layers. Geometry Checking commands return each type of DV layer; this translates to width and separation checks that return either error clusters or polygons.

Results are returned for geometry that meets the specified test. These results may be intermediate and used as input for other DV commands (rule conjunction) and/or saved as final results using SaveLayer.

 

The topics for this section include:

EncloseTo Commands

NotchTo Commands

OverhangTo Commands

OverlapTo Commands

SeparationTo Commands

WidthTo Commands

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com