ImportNet

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Design Verification >
   Design Verification Commands >
       Design Verification Layer >
           Import Commands >
               ImportNet

Input: Name of an existing layout net qualifier "Not" or "Only" (optional)

Output: DV layer (containing polygons)

Description: Geometry of objects being considered for the run is added to the returned layer based on the given net name and argument.

• The argument may be either "Only" or "Not". If the argument is not present it is defaulted to "Only". "Only" specifies the return of objects belonging to the named net. "Not" returns objects not belonging to the named net.

• Normally the imported geometry in a DV layer is merged before being used, because merged geometry more closely represents what will be manufactured. However, some commands have an option to use the raw (unmerged) data.

• Any arc edges imported will be approximated with straight edges before being used by DV. The faceting will be determined by the value specified for the run in the Run dialog.

• Collinear edges are merged together before being used by DV.

Rule Set Example (JScript):

var namedNet = DVChecker.ImportNet("Pin1");

var namedNet2 = DVChecker.ImportNet("Pin2", "Only");

var namedNet3 = DVChecker.ImportNet("Pin1", "Not");

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com