淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Design Verification >
   Design Verification Commands >
       Design Verification Layer >
           Import Commands >
               ImportLayer                   


ImportLayer

 

Input: Name of an existing layout layer (no restrictions on layer type)

Output: DV layer (containing polygons)

Description: Geometry of objects being considered for the run.

• Normally, the imported geometry on a DV layer is merged before being used, because merged geometry more closely represents what will be manufactured. However, some commands have an option to use the raw (unmerged) data.

• Any arc edges which are imported will be approximated with straight edges before being used by DV. The faceting will be determined by the value specified for the run in the Design Verification Run Dialog.

• Collinear edges are merged together before being used by DV.

Rule Set Example (JScript):

var layer1 = DVChecker.ImportLayer("trace");



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com