淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Windows HPC Integration >
HPC Integration Guidelines >
Task Properties

Task Properties

In general, each HPC job consists of one or more tasks. For Ansoft batch analyses run as Windows HPC jobs, the job contains one task to control the analysis. This task is equivalent to the Ansoft Desktop GUI, which controls the analysis when running in interactive mode. The properties of this task must be set correctly for analysis to be successful. Following are some of the main task properties:

• Task Name — Text string that may be used to identify or describe the task

• Working Directory — Working directory where the task is started

• Command Line — The command line executed to start the task

• Number of Processors — The min/max number of job units required to run the task

Of these properties, Command Line is particularly important. It is recommended that you use the Designer Submit HPC Job dialog to submit jobs, as this will assist you in creating a valid task Command Line. If you do not use the HPC Job dialog to submit jobs, then you must specify the complete command line for the Desktop task.

• For Ansoft Jobs, all compute resource requirements are specified at the job level.

• At the task level, the minimum and maximum computing resource units should be set to one.

• The Desktop task will start additional tasks and child process, if needed, to complete the analysis.

For more information, see Command Line HPC Jobs.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com