淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

推荐课程   ADS2011   |   HFSS   |   Ansoft Designer   |   MWO2006   |   CST   |   Ansoft全集  

 

台湾射频专业课程   |   微波测量操作培训   |   天线设计   |   Cadence Allegro   |   PADS2007 

精品教程, 让您最快速提升专业能力, 诚信为本, 合作共赢
 

 

培 训 教 程 列 表

微波射频仿真设计培训
ADS2008、ADS2011
HFSS
Ansoft Designer
AWR Microwave Office
CST
  Anost SIWave
  Anost Maxwell
Anost Q3D
Feko
Zeland IE3D9.2
 
微波测量仪器操作培训
矢量网络分析仪
频谱分析仪
微波信号源
数字示波器
逻辑分析仪
高校视频课程套装
台湾中华大学视频
射频经典培训课程
大陆高校视频课程
全美一流高校视频
 
PCB设计软件培训
Cadence Allegro
PADS2007
Mentor EN2004
Mentor Exp2005
Mentor WG2004
Mentor DxDesigner
Protel
微波器件设计
微波滤波器设计套装
微波放大器设计套装
低噪声放大器设计套装
微波振荡器设计套装
微带天线设计套装
 
购买联系
     购买联系
     关于我们
    信誉保证
     官方淘宝店

Ansoft软件 学习培训教程全集

                   Ansoft Deisnger 学习培训教程                           Ansoft HFSS 学习培训教程
                   Ansoft Maxwell 学习培训教程                           Ansoft SIWave 学习培训教程
                   Ansoft Serenade 学习培训教程                           Ansoft Q3D 学习培训教程  
 


8
  Ansoft Maxwell学习培训教程套装    (¥130)                                                            
我要购买
 
 

Ansoft Maxwell 10 视频教程一套
Ansoft Maxwell 3D Training Manual 一套
Ansoft Maxwell 3D 入门与提高教程 一套
注:学习套装里的教程也可以分开单独购买,下面是套装中的教程内容简介和单售价格
 


01.  Maxwell 3D 入门与提高教程 ---- 英文399页 (¥60)

        Ansoft公司关于 Maxwell 3D 培训的最新内部原版教程,共十一章600多页,详细介绍 Ansoft Maxwell 的使用。主要内容有:
       0. fundmentals                                            3. Data Reporting
             0.1 Ansoft Maxwell Desktop              4. Solve Loop
             0.2 Opening a Design                           5. Examples-Magnetic Force
             0.3 Setting a Model Type                    6. Eddy Current Examples
        1. Parametric Model Creation                   7. Transient Examples
            1.1  Boundary Conditions                     8. Maxwell 3D Overview
            1.2  Exitations                                     
        2.  Analysis Setup  


02. Ansoft Maxwell 10 视频教程--(¥50)


      Ansoft公司关于 Ansoft Maxwell  的视频多媒体教程,主要内容有:
                 1. Introduction to Ansoft EM (20minutes)
                 2. Maxwell V10 New Features Presentation (23minutes)
                 3. 3D Transient with Motion (24minutes)
                 4. Magnetostatic - Structural coupled solution (18minutes)
                 5. Eddy Current/Thermal Transient Coupled Solution (21minutes)
                 6. Maxwell 3D Magnetostatic (24minutes)
                 7. Maxwell 3D Transient (16minutes)
                 8. Optimetrics Getting Started: A Parametric Study (13minutes)
 



03. 
Maxwell 3D Training Manual ----英文272页 (¥30)


内容目录如下:
               01.  Overview of Maxwell 3D, ePhysics and 3D Modeler
               02.  ModelerTutorial
               03.  3D Material Sources Meshing
               04.  A Multipole Permanent Magnet Problem
               05.  A Quadrupole Mass Spectrometer Problem
               06.  Post Processing
                     等等
 

8  Ansoft SIWave 3.0 学习套装    (¥90)                                                                我要购买
 


Ansoft SIWave v3.0 英文原版设计实例教程(英文120页)
Ansoft SIWave 英文原版培训教程(英文159页)
 



01.
Ansoft SIWave 3.0 原版设计实例教程-- 英文120页 (¥50


       Ansoft 公司内部教程,通过五个仿真设计工程实例介绍了Ansoft SIWave的使用,图文并茂,适于入门者自学,内容简介如下:
        1.  Board Design Example
        The board design example is intended to show you how to import , simulate, and analyze a 4-layer board structure using SIwave.
        2.  Package Planes Impedance Example
        The example is intended to show you how to simulate Z-parameters on a 4 layer package structure using SIwave.
        3.  Package S-parameters Example
        The example is intended to show you how to simulate S-parameters on a 4 layer package structure using SIwave.
        4.  SSN on PCB Simulation
        The example is intended to show you how to simulate SSN. Two signal nets will be driven and one signal net will be left quiet. We will look at the noise on the quiet signal net and power rail.
        5.  Package on PCB Simulation
        This example shows you how to connect a package onto a PCB for system level simulation.
 



02.
Ansoft SIWave 3.0 英文原版培训教程 -- 英文159页 (¥40
 

    1. Board Interface Overview
    2. Trace with Via, Ground Plane with Apertures
    3. Analyzing return currents of a differential pair on a package
    4. Post-Layout analysis of a BGA package
    5. Post-layout analysis of a PCB
 


8  Ansoft Serenade 8.71 学习套装    (¥120)                                                         我要购买
 

 


Ansoft Serenade8.71安装光盘一张
Samsung培训教材一套:Using Ansoft Serenade to Design LNA
台湾CIC 关于Ansoft  Serenade的培训教程一套
英文图书一本:RF/Microwae Circuit Design For Wireless Applications



01.
  Using Ansoft Serenade to Design LNA ---- 英文72页 (¥10)
 

      This Training  is developed for Samsung Electronics train center。It gives a step-by-step Serenade training matirial  with practical circuit (for the Handset )
 



02.
  台湾CIC 关于Ansoft  Serenade的培训教程  ---- 英文185页 (¥25)
 
台湾CIC关于Ansoft  Serenade的入门培训教程,185页,共分六个部分, 分别为:
            1.  Serenade Harmonica Overview                                             2.  Hierarchical Schematics
            3.  Low noise amplifier Design and Load Pull Simulation 
            4.  Oscillator Design and Large Signal S-parameters                  5.  Single Balanced Mixer Design
            6.  Double Down Conversion Communications Receiver
 


03.
 RF/Microwae Circuit Design For Wireless Applications ----(¥20
 

       关于Ansoft Serenade的培训教材很少,这本书是学习Ansoft Serenade不错的参考资料。这本书是Ansoft Corp.的一位工程师编写的,里面的例子全是Ansoft Serenade设计的。
 


8  Ansoft Q3D 学习套装    (¥100)                                                                          我要购买

 

 


Ansoft  Q3D Extractor 6.0 入门与提高教程(英文原版)一套
Ansoft  SI2D Extractor 6.0 入门与提高教程(英文原版)一套
 



01.
  Ansoft  Q3D Extractor 6.0 入门与提高教程 —— 英文265页  (¥60)
 

        Ansoft公司关于 Ansoft Q3D Extractor 6.0  培训的内部原版教程,共五章265页,详细介绍 Ansoft Q3D Extractor 6.0  的使用。主要内容有:
         0.  Fundamentals
              0.1  Ansoft Q3D Extractor Desktop
              0.2  Opening a Design in Q3D Extractor
         1. Parametric Model Creation
              1.1  Boundary Conditions
              1.2  Excitations – Source/Sink
         2.  Analysis Setup
         3.  Data Reporting
              3.1  Reports
              3.2  Matrix Reduction
              3.3  Fields
         4. Solve Loop
              4.1 Mesh Operations
         5. Examples
              5.1  Microstrip Z-Bend Examples
              5.2  Micro Via Examples
              5.3  Segmented Return Path Examples
              5.4  Ball Grid Array (BGA) Examples
              5.5  Board Mount Connector Examples
              5.6  Bond Wires Examples
              5.7  Spiral Inductor Examples
 



02.  Ansoft  SI2D Extractor 6.0 入门与提高教程 —— 英文265页  (¥45)
 

      Ansoft公司关于 Ansoft SI2D Extractor 6.0  培训的内部原版教程,共五章216页,详细介绍 Ansoft Q3D Extractor 6.0  的使用。主要内容有:
         0.  Fundamentals
              0.1  Design Environment
              0.2  Quick Starte
         1.  Maxwell Control Panel
         2.  SI2D Extractor Exective Command
              2.1  Pre-Processing
              2.2  Solution
              2.3  Post Processing
          3. Examples
              3.1  Coax Examples
              3.2  Over-Etching Examples
              3.3  Bond Wire Examples
              5.4  Crosstalk Examples
              5.5  Coplanar Waveguide Examples
              5.6  Grouded Coplanar Waveguide Examples

 

TOP

 

Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com