淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
Discrete Time Analysis >
Setting Discrete Time Simulation Control Parameters with Convolution

Setting Discrete Time Simulation Control Parameters with Convolution

For the discrete time simulation of a mixed-mode communications system, the user must carefully select the following control parameters:

= Simulation time step (which may assume different values at different points in the system)

MIN_BW = Minimum bandwidth of an electrical component or sub-design in the complete mixed mode system.

MAX_RATIO = Ratio of a local maximum to the global maximum in the impulse response.

The topics for this section include:

Step 1: Choosing The Simulation Time Step

Step 2: Choosing the Minimum Bandwidth Control Variable

Step 3: Choosing the Maximum Ratio Control Variable

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com