淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Design Verification >
   Design Verification Commands >
       Connectivity Checking Commands >
           FindShortCircuits               


FindShortCircuits

Input: none

Output: DV layer (containing paired polygons)

Description: Geometry of objects being considered for the run are checked for intersections. A "short circuit" is two geometries that intersect, where at least one geometry belongs to a layout net and the other geometry does not belong to the same net. The returned layer contains pairs of short-circuit geometry.

• Any imported arc edges will be approximated with straight edges before being used by DV. The faceting will be determined by the value specified for the run in the Design Verification Run Dialog.

Rule Set Example (JScript):

var scLayer = DVChecker.FindShortCircuits();



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com