Connector - Terminal Example - HFSS 教学培训

首页射频工程师培训 HFSS培训 ADS培训 CST培训天线设计培训微波测量操作培训射频专业基础课官方淘宝店

Example Projects

Connector - Terminal Example

Description - a simplified model of a four pin section of a connector. This is a driven terminal design.

Model - the connector is configured with lumped ports on each end of the two inner pins. The two outer pins are each grounded at both ends. The boards are FR4 and the connector body is modfied epoxy. A radiation boundary is applied to the surrounding airbox.

Setup - Driven Terminal Solution with adapt at 5 GHz. An interpolating sweep is also included that has an upper frequency of 5 GHz and uses DC extrapolation at the low end.

Note

To view a port or boundary, select the desired item in the Project Tree. It is then highlighted in the Model window and the properties will be displayed in the Properties window. Selecting an object in the History tree will also display its properties.

Connector Post Processing

After solving, you can view solution data by right-clicking on Setup1 and selecting Profile to display the Solution dialog. You also view the Solution tabs for Convergence, Matrix Data, and Mesh Statistics.

To view the S parameter plot show below, double click on XY plot1 in the Project Tree under Results.

HFSS中文学习培训教程套装

国内最全面的HFSS培训课程，包含7套视频教程和2本教材，资深专家讲解，视频操作演示，结合最新工程案例，让HFSS学习不再难...【详细介绍】