![]() ![]() ![]() ![]() ![]() |
|
微波射频仿真设计 |
|
首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
System Simulator > Transmission Power Control (TPC)
Notes1. The Transmission Power Control model can be used generate transmission power control commands (+/- 1) with an interval of one slot. +1 indicates increasing transmission power, and -1 indicates reducing transmission power. 2. Let I(k) be the interference power at
the kth slot. Before being used to calculate SINR, the input interference
power is pre-averaged using a first-order filter with forgetting factor
as follows 3. The measured SIR l(k)
the kth slot is defined as Netlist FormTPC:NAME n1 n2 n3 SIR=val [FORGETTOR =val] [INIT_SLOT =val] [RIN1=val] [RIN2=val] [ROUT=val] Netlist ExampleTPC:1 1 2 3 SIR = 0 FORGETTOR=1.0 INIT_SLOT =1 References1. A. J. Viterbi, CDMA: Principles of Spread Spectrum Communication, Wesley Publishing Company, 1995. 2. H. Andoh, M. Sawahashi, and F. Adachi, “Channel estimation filter using time-multiplexed pilot channel for coherent Rake combining in DS-CDMA mobile radio,” IEICE Trans. Commun., vol. E81-B, no. 7, pp. 1517–1526, July 1998. HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |