淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Sources >
   Sine Wave (SIN)       

Sine Wave (SIN)

 

 


Property

Description

Units

Default

Range/Type

NSAMP

Number of samples

None

1024

(0, Inf)/Integer

SAMPLE_RATE

Output sample rate

MHz

102.4

(0, Inf)/Real

F

Output frequency

MHz

1

[0, Inf)/Real

AMPLITUDE

Amplitude

Volt

1

(-Inf, Inf)/Real

OFFSET

Voltage offset

Volt

0

(-Inf, Inf)/Real

PHASE

Output Phase Shift

Deg

0

(-Inf, Inf)/Real

ROUT

Output impedance

Ohm

0

[0, Inf)/Real

Ports

Output

Output signal (real)

 

Notes

The output voltage of this model is given by:

where A is the amplitude. Note that the sampling rate must be at least twice larger than the fre­quency of the sinusoid.

Netlist Form

SIN:Name n1 [NSAMP=val] [SAMPLE_RATE=val][F=val] [AMPLITUDE=val] [OFFSET=val] [PHASE=val] [Rout=val]

 

Netlist Example

SIN:1 n1 NSAMP=2048 SAMPLE_RATE=10MHz F=1MHz AMPLITUDE=2v OFFSET=0.5v PHASE=45



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com