淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Vector >
   Parallel to Serial Converter (PTOSCONV)       

Parallel to Serial Converter (PTOSCONV)

 

 


Property

Description

Units

Default

Range/Type

Width

Width used to convert from parallel to serial

None

8

[0, 2048]/Integer

RIN

Input impedance

Ohm

Inf

(0, Inf]/Real

ROUT

Output impedance

Ohm

0

[0, Inf)/Real

Ports

Input

Input signal (complex vector)

Output

Output signal (complex)

 

Notes

This model converts the complex vector signal from parallel to serial. Suppose the width of the input vector is “w”, the parameter “width” determines the how many entries in the vector are sent to the output. If “width” is greater than “w”, every entry in the input vector will be sent to the out­put port. The output signal has a sampling rate of input sampling rate times outWidth, where out­Width is minimum of “w” and “width”.

Netlist Form

PTOSCONV:NAME n1 n2 [width=val] [Rin=val] [Rout=val]

Netlist Example

PTOSCONV:1 1 2 width = 8



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com