淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Probes >
   Probability Density Function Probe (PDFP)       

Probability Density Function Probe (PDFP)

 

 


Properties

Description

Units

Default

Range/Type

Name

Probe name

None

Required

String

nbin

Number of histogram bins

None

64

[1, Inf)/Integer

nsamp

Number of samples used for histogram

None

1024

[1, Inf)/Integer

Initsamp

Number of initial samples removed from waveform

None

0

[0, Inf)/Integer

Rin

Input impedance

Ohm

Inf

(0, Inf]/Real

Ports

Input

Input signal (real)

 

Notes

1. The Probability Density Function (PDF) probe is similar to the Histogram probe. After deter­mining the histogram function, it is normalized by the total number of samples. The total num­ber of input samples per bin are determined and displayed versus the x-axis, represented by the bin locations. If the user specifies a nsamp value larger than the total number received from the source, the actual number of samples received will be used for the calculation.

Netlist Form

PDFP:NAME n1 nbin=val nsamp=val [Initsamp=val] [Rin=val]

Netlist Example

PDFP:my_pdfp 1 nbin=64 nsamp=65536



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com