淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Probes >
   Peak-to-Average Power Probe (PAPP)       

Peak-to-Average Power Probe (PAPP)

 

 


Properties

Description

Units

Default

Range/Type

Name

Probe name

None

Required

String

Initsamp

Number of initial samples removed from waveform

None

0

[0, Inf)/Integer

Rin

Input impedance

Ohm

Inf

(0, Inf]/Real

Ports

Input

Input signal (real)

 

Notes

1. This probe calculates the peak to average power ratio of an incoming signal.
If the input signal is , , then the peak-to-average power ratio is calculated as fol­lows:

Netlist Form

PAPP:Name n1 [Initsamp=val] [Rin=val]

Netlist Example

PAPP:my_papp 2



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com