淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Lumped >
   Negative Impedance Converter (NIC)       

Negative Impedance Converter (NIC)

 

[spacer]

 


Properties

Description

Unit

Default

Range

Type

Type (Voltage or Current)

None

V

V / I

K1

Voltage transfer ratio

None

Required

(-Inf, Inf)

K2

Current transfer ratio

None

1

(-Inf, Inf)

Notes

4. Absolute values are used for computations. A positive value is used even if K1 and K2 are neg­ative.

5. Values of exactly zero are not allowed for either K1 or K2. If a zero value is supplied or is implied through omission, a value of 1.0e-5 is assigned.

6. For option V: V1=-|K1|V2

I1=-|K2|I2

For option I: V1=|K1|V2

I1=|K2|I2

Netlist Form

NIC:NAME n1 n2 Type={V,I} K1=val [K2=val]

Netlist Example

X_I 1 2 NICI
X_V 3 4 NICV
.subckt NICI 1 2
NIC:1 1 2 Type=I K1=1.5 K2=1
.ends
.subckt NICV
NIC:2 1 2 Type=I K1=1.5 K2=2
.ends
.NWA F= 0 1 1KHZ 1MHZ 1GHZ 10GHZ 40GHZ
.end



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com