淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Lumped >
   Coupled Inductors, K (MUIK)       

Coupled Inductors, K (MUIK)

 

[spacer]

 


Properties

Description

Unit

Default

Range

L1

Self inductance of coil 1 (connected to nodes n1 and n3)

H

Required

³0

L2

Self inductance of coil 2 (connected to nodes n2 and n4)

H

Required

³0

K

Coupling coefficient

none

0

[-1,1]

POLAR

Polarity type (positive or negative)

none

po

[po,ne]

Notes

1. The coupling coefficient may range in values from -1 to 1, where negative values imply a reversing of the relative polarity.

2. In the symbol, the polarity is indicated by the dot on the drawing. A negative value of K, or set­ting POLAR=ne reverses the relative polarity.

Netlist Form

MUIK:NAME n1 n2 n3 n4 L1=val L2=val [K=val] [POLAR=val]

Netlist Example

MUIK:NAME n1 n2 n3 n4 L1=4nH L2=16nH K=0.5



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com