淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Microstrip >
MS Meander Line, Total Length Defined, EM (MSMEANDERL)

MS Meander Line, Total Length Defined, EM (MSMEANDERL)

Properties	Description	Units	Default	Range
N	Number of turns	none	Required	³ 1
W	Line width	m	Required	>0
LTOTAL	Total length of meander	m	Required	>0
BH	Maximum vertical dimension of one turn	m	Required	>0
BW	Maximum horizontal dimension of meander	m	Required	>0
L1	Length of feedline to port1	m	0	³ 0
L2	Length of feedline to port2	m	0	³ 0
DIM	0=Use BH 1=Use BW	none	Required	0,1
CENTER	0=Centered ports 1=Ports at lower edge of meander line	none	Required	0,1
SUB	Substrate name	none	Optional, user defined string	string
CoSimulator	Simulation engine	none	Planar EM	Planar EM
CoSimStackup	Stackup used for simulation	none	Layout Stackup	Layout Stackup, Footprint stackup, Substrate

Notes

1. This component is available for Planar EM simulation only

2. The transmission line lengths L1 and L2 may be set to zero, leaving the reference planes at the edge of the turns.

3. If a substrate is not defined for this component, the Layout stackup or the footprint stackup may be used.

There is no netlist form for this component; it is available for Planar EM analysis only.

N/A

References

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com