ÌÔ±¦¹Ù·½µê ÍÆ¼ö¿Î³Ì ÔÚÏß¹¤¾ß ÁªÏµ·½Ê½ ¹ØÓÚÎÒÃÇ
¡¡
¡¡	Î¢²¨ÉäÆµ·ÂÕæÉè¼Æ Ansoft Designer ÖÐÎÄÅàÑµ½Ì³Ì \| HFSSÊÓÆµÅàÑµ½Ì³ÌÌ××°
¡¡	Agilent ADS ÊÓÆµÅàÑµ½Ì³Ì \| CSTÎ¢²¨¹¤×÷ÊÒÊÓÆµ½Ì³Ì \| AWR Microwave Office

Ê×Ò³ >> Ansoft Designer >> Ansoft DesignerÔÚÏß°ïÖúÎÄµµ

Ansoft Designer / Ansys Designer ÔÚÏß°ïÖúÎÄµµ£º

System Simulator >
System Component Models >
WCDMA Rake Receiver >
Multipath Search (MPATHSEARCH)

Multipath Search (MPATHSEARCH)

Property	Description	Units	Default	Range/Type
METHOD	Pilot Assisted {0} / Perfect {1}	None	0	[0, 1]/Integer
L	Number of paths	None	2	[1, 16]/Integer
G	Spreading factor	None	32	[2, Inf)/Integer
S	Number of samples per chip	None	4	[1, 128]/Integer
K	Number of slots for block-average power delay estimation	None	1	[1, Inf)/Integer
NP	Number of pilot symbols	None	4	[1, Inf)/Integer
ND	Number of data symbols	None	36	[0, Inf)/Integer
N0	Number of the first pilot symbol	None	0	[0, Inf)/Integer
DMAX	Maximum multipath delay (samples)	None	31	[0, Inf)/Integer
D0~D15	Multipath delays (samples)	None	0	[0, Inf)/Integer
RIN1	Input1 impedance	Ohm	Inf	(0, Inf]/Real
RIN2	Input2 impedance	Ohm	Inf	(0, Inf]/Real
RIN3	Input3 impedance	Ohm	Inf	(0, Inf]/Real
RIN4	Input4 impedance	Ohm	Inf	(0, Inf]/Real
ROUT	Output impedance	Ohm	0	[0, Inf)/Real
Ports
Input1	Received signal in complex envelope format (complex)
Input2	Optimum sample position (integer)
Input3	Spreading code (complex)
Input4	Pilot symbols (complex)
Output	Multipath delays, in terms of samples (integer)

Limits

,

Notes

1. The multi-path search model can be used to search multi-path and estimate multi-path delays under the condition that the optimum sample position is known. If Method is set to Pilot Assisted {0}, the multi-path delays are estimated using the corresponding spreading code and pilot symbols. For detailed algorithm, please refer to the matched filter model. If Method is set to Perfect {1}, the multi-path delays are set to D₀~ D_L-1.

2. Note that L delay values are outputted successively for each symbol.

Netlist Form

MPATHSEARCH:NAME n1 n2 n3 n4 n5 [METHOD=val] L=val G=val [S=val] [K=val] NP=val ND=val

+ [N0=val] [DMAX=val] [D0=val,…, D15=val] [RIN1=val] [RIN2=val] [RIN3=val] [RIN4=val] [ROUT=val]

Netlist Example

MPATHSEARCH:1 1 2 3 4 5 METHOD = 0 L =2 G = 32 S = 4 DMAX = 20 NP = 4 ND = 16 D0 = 1 D1 = 9

References

1. J. G. Proakis, Digital Communications, McGraw-Hill, 2001.

2. A. J. Viterbi, CDMA: Principles of Spread Spectrum Communication, Wesley Publishing Company, 1995.

3. K. Higuchi, H. Andoh, et al, “Experimental evaluation of combined effect of coherent RAKE combining and SIR-based fast transmit power control for reverse link of DS-CDMA mobile radio,” IEEE Journal on Selected Areas in Communications, vol. 18, No.8, pp.1526-1535, Aug. 2000.

HFSSÊÓÆµ½Ì³Ì ADSÊÓÆµ½Ì³Ì CSTÊÓÆµ½Ì³Ì Ansoft Designer ÖÐÎÄ½Ì³Ì

¡¡