淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Lumped >
Mutual Inductance, K (K)

Mutual Inductance, K (K)

Properties	Description	Unit	Default	Range
CouplingFactor	Inductor coupling	None	0.99	(-1,1)
Inductor1	ID of inductor 1	None	Required	string
Inductor2	ID of inductor 2	None	Required	string
Inductor3	ID of inductor 3	None		string
Inductor4	ID of inductor 4	None		string
Inductor5	ID of inductor 5	None		string
Inductor6	ID of inductor 6	None		string
Inductor7	ID of inductor 7	None		string
Inductor8	ID of inductor 8	None		string
Inductor9	ID of inductor 9	None		string
Inductor10	ID of inductor 10	None		string

Notes

1. More inductors may be added to the component by following the formatting of the existing ten coupled inductors.

2. This is a SPICE component

Netlist Form

K@ID IND:Inductor1 IND:Inductor2 [ IND:Inductor3 IND:Inductor4 IND:Inductor5 IND:Inductor6 IND:Inductor7 IND:Inductor8 IND:Inductor9 IND:Inductor10 ]CouplingFactor

Netlist Example

KCoupledCaps 0.99 IND:1 IND:2

References

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com