淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Fixed-Point >
Fixed-Point Finite Impulse Response Filter (FXTFIR)

Fixed-Point Finite Impulse Response Filter (FXTFIR)

Property	Description	Units	Default	Range/type
useInAsOut	Use the input precision as the output precision: 1 for used, 0 for not used	None	1	[0, 1]/Integer
coefW	Word length of fixed point coefficient	None	32	[1, 32]/Integer
coefD	Precision of the fixed point coefficient	None	0	[0, 32]/Integer
outW	Word length of the output fixed point number	None	32	[1, 32]/Integer
outD	Precision of the output fixed point number	None	0	[0, 32]/Integer
ovf	Overflow characteristic: 0 for wrapped, 1 for saturate, 2 for zero saturate	None	0	[0, 2]/Integer
quant	Quantization characteristic: 0 for truncated, 1 for rounded, 2 for truncated	None	0	[0, 2]/Integer
file	Name of the external file (required)	None	Required	String
ArithType	Arithmetic type: 0 for signed, 1 for unsigned	None	0	[0, 1]/Integer
Rin	Input impedance	Ohm	32	(0,Inf]/Real
Rout	Output impedance	Ohm	32	[0, Inf)/Real
Ports
Input	Input signal (fixed point real number)
Output	Output signal (floating point real number)

Limits

1. outW > outD, coefW > coefD for signed arithmetic

Notes

1. This model implements an FIR filter based on filter tap coefficients provided by the two-column XY format data block in the external file. Each (X,Y) entry indicates the tap number and the corresponding tap coefficient. The coefficients are floating point numbers. They are converted to fixed-point number according to the parameters: coefW, coefD, ovf, quant, arithtype. The format of the output signal is specified by the parameters: outW, outD, ovf, quant, arithtype. Note that if useInAsOut is set to 1, the format of the fixed output number is set to be the format of the input fixed point number, ignoring the parameters outW, outD, ovf, quant, arithtype.

2. The following plot shows the relationship between word length and precision.

Netlist Form

FXTFIR:NAME n1 n2 [useInAsOut=val] [coefW=val] [coefD=val] [outW=val] [outD=val] [ovf=val] [quant=val] [file=val] [arithtype=val] [Rin=val] [Rout=val]

Example

FXTFIR:1 1 2 useInAsOut=0 coefW=16 coefD=4 outW=24 outD=8 ovf=1 quant=1 file=”filename”

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com