![]() ![]() ![]() ![]() ![]() |
|
微波射频仿真设计 |
|
首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
System Simulator > Deinterleaver, 802.11a (DEILV11A)
![]()
Limits![]()
Notes1. This model can be used for data deinterleaving, according to IEEE 802.11a standard. 2. All demodulated data bits shall be deinterleaved by a block deinterleaver with a block size corresponding to the number of bits in a single OFDM symbol, NCBPS. The deinterleaver, which performs the inverse relation of the interleaver, is also defined by a two-step permutation. 3. Here we shall denote by J the index of the original
received bit before the first permutation; i shall be the index
after the first and before the second permutation, and k shall be the
index after the second permutation, just prior to delivering the coded
bits to the convolutional (Viterbi) decoder. The first permutation
is defined by the rule Table I IEEE 802.11a Rate-dependent parameter
Netlist FormDEILV11A:NAME n1 n2 [MODULATION =val] [RIN=val] [ROUT=val] Netlist ExampleDEILV11A:1 1 2 MODULATION = 2 References1. IEEE Std 802.11a, Part 11: “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: High-speed Physical Layer in the 5 GHz Band,” ISO/IEC 8802-11:1999/Amd 1:2000(E). 2. J. Terry and J. Heiskala, Proakis, OFDM Wireless LANs: A Theoretical and Practical Guide, Sams Publishing, 2002. HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |