淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Sources >
   Data File Source, Complex (CFILESRC)       

Data File Source, Complex (CFILESRC)

 

 


Property

Description

Units

Default

Range/Type

NSAMP

Number of samples to read from external file

None

100

(0, Inf)/Integer

SAMPLE_RATE

Rate at which samples output from source file

Hz

1000

(0, Inf)/Real

FILE

Name of the external file

None

<Filename>

String

ROUT

Output impedance

Ohm

0

[0, Inf)/Real

Ports

Output

The output signal (complex)

 

Notes

This model reads complex type data from an external file and outputs it at a rate equals to SAMP_RATE. The file should simply contain the ascii data to be read out. The data should be stored on a sample by sample basis the sample’s real value followed by its imaginary value. If the file contains fewer than NSAMP data points, then the data in the file is read in a periodic fashion until NSAMP samples are output.

 

Netlist Form

CFILESRC:Name n1 NSAMP=val SAMPLE_RATE=val File= val +[Rout=Val]

Netlist Example

CFILESRC:1 1 NSAMP=1000 SAMPLE_RATE=3.5MHZ



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com