淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Vector >
   Convert Width-M Input Bus to Width-N Output Bus (BUSSPLIT)       

Convert Width-M Input Bus to Width-N Output Bus (BUSSPLIT)

 

 


Property

Description

Units

Default

Range/Type

Start

Start index

None

0

[0, 2048]/Integer

Stop

Stop index

None

1023

[0, 2048]/Integer

RIN

Input impedance

Ohm

Inf

(0, Inf]/Real

ROUT

Output impedance

Ohm

0

[0, Inf)/Real

Ports

Input

Input signal (complex vector)

Output

Output signal (complex vector)

 

Notes

This model takes a bus and outputs another bus. The output bus is formed by picking the entries of the input bus starting at index “start” and stopping at index “stop”. The indices must be in the range of the width of the input bus signal.

Netlist Form

BUSSPLIT:NAME n1 n2 start=val stop=val [Rin=val] [Rout=val]

Netlist Example

BUSSPLIT:1 1 2 start = 0 stop = 1023

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com