淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Data Converters >
   Binary to M-ary Coder (BMEN)       

Binary to M-ary Coder (BMEN)

 

 


Property

Description

Units

Default

Range/Type

NB

Number of bits to group into one symbol

None

1

[1, 31]/Integer

RIN

Input impedance

Ohm

Inf

(0, Inf]/Real

ROUT

Output impedance

Ohm

0

[0, Inf)/Real

Ports

Input

Input signal of bits, starting with LSB (real)

Output

Output signal of symbols (real)

 

Notes

1. This model outputs integer symbols in the Range/Type of 0, ...., 2NB – 1 from an integer input signal made up of 0's and 1's.

2. Each incoming NB bits are grouped and mapped to one of the corresponding above symbols (BMEN interprets the value of each bit as follows: V<0.5 : binary 0, V>=0.5 : binary 1).

3. The ratio of the output symbol rate to that of the input bit rate is 1/NB.

Netlist Form

BMEN:Name n1 n2 NB=val [Rin1=val] [Rin2=val][Rout=val]

Netlist Example

BMEN:1 1 2 NB=2



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com