淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
System Component Models >
Probes >
Average Power Probe (AVGPP)

Average Power Probe (AVGPP)

Property	Description	Units	Default	Range/Type
Name	Probe name	None	Required	String
INITSAMP	Number of initial samples removed from waveform	None	0	[0, Inf)/Integer
RIN	Input impedance	Ohm	50	(0, Inf]/Real
Ports
Input	Input signal (complex)

Notes

1. The results of this probe may only be viewed in the SWEEP/Network Function domain. They may not be viewed in the time or spectral domain. For a given input signal

This average power probe takes the samples of the incoming input complex envelope signal and computes the average power by

Where Dt is the time sampling step, N is the total number of samples available at the input, and Rin is the load impedance looking into the input port of the probe.

Netlist Form

AVGPP:Name n1 [Initsamp=val] [Rin=val]

Netlist Example

AVGPP:My_Avgpp 1

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com