淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Windows HPC Integration >
Installing Ansoft Tools

Installing Ansoft Tools

The following guidelines describe the requirements and allowable configurations for the HPC Ansoft tools installed on UNIX/LINUX and Windows platforms.

• Ansoft tools must be available on each cluster host where Ansoft jobs are run.

— For UNIX/LINUX platforms, Ansoft tools may be installed on a shared drive that is accessible to all machines in the cluster.

— For Windows platforms, Ansoft tools must be installed separately on each host of the cluster.

• Ansoft tools must be accessible using the same path on each host.

• All cluster users running Ansoft jobs must have permission to read and execute files in the Ansoft installation directory and its subdirectories.

• The temp directory selected during installation must be readable and writable by all user accounts used to run Ansoft tools.

• Because HPC is offered as a direct integration, you only need to install the Ansoft software — no additional configuration is required.

Example:

Install the Ansoft tools on each node of the cluster in the directory “C:\Program Files (x86)\Ansoft\Designer7”. The same directory pathname must be used on all hosts.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com