淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

CST视频教程推荐   CST微波工作室入门与应用详解   |  CST使用操作基础

          首页 >> CST教程 >> CST2013在线帮助系统

Waveguide Filter

Transient Analysis Examples - S-Parameter Calculations: Waveguide Devices

 

Full model:

Half model (with CST DESIGN STUDIO):

General Description

 

This waveguide filter simulation is an educational example for demonstrating various solving techniques for the same model. The waveguide filter can be simulated by either the Time-Domain solver including AR-filter (first example), the general Frequency solver, the Resonant Fast Frequency solver, or the Eigenmode solver. In addition, CST DESIGN STUDIO can be applied to simulate the whole model after using half of the geometry as a model in CST MICROWAVE STUDIO as demonstrated in the second example.

Structure Generation

 

The structure is modelled by defining a curve using the extrude option or defining a brick and removing some parts. If half of the part is defined the geometry can be created using the mirroring option.

Solver Setup

 

In order to enable a calculation two waveguide ports are defined at each side of the filter. The working frequency range is set to 30 - 40 GHz.

Post Processing

 

Performing a transient calculation of the full model (first example) using waveguide ports, the resulting time signals are automatically converted into the desired scattering parameters. All these results are listed in the navigation tree in the folder 1D Results and demonstrate the wave propagation of the filter.

 

The second example only simulates half of the structure within the transient solver of CST MICROWAVE STUDIO. Again the resulting time signals are converted automatically into scattering parameters and can be viewed in the navigation tree.

These scattering parameters are then used in CST DESIGN STUDIO to obtain the results of the full model. The whole procedure is setup as an S-parameter task and is started directly within CST DESIGN STUDIO. The transient simulation is then automatically triggered in case that the S-parameters are not already available.

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com