Template Based Post ProcessingThis template offers a huge variety of mathematical operations to extract a real number (=0D Result) from an existing 1D result curve.
Having a fixed 0D value to compare and to prove the device’s quality is very often the most accurate criterion. This template gives you the opportunity to get the correct real value from your 1D Result in order to use it later as an optimizer goal or as a watch within a parameter sweeping of adaptive meshing.
|
|
|
Please note: The quality of an optimization process very much depends on the correct goal definition. Especially there are differences between the following similar looking goals and also between their optimization results !
•Maximize Mean Value (y)
•Maximize y-Maximum
•Maximize y-Minimum
All three goals do maximization, however with the following difference:
•Maximize Mean Value (y) does not take special care on best or worst case
•Maximize y-Maximum is only looking on the best case
•Maximize y-Minimum is only looking on the worst case
OK
This button completes the setup of the template. The new entry will be added to the list of templates which are executed automatically after each run. The default name of the template is set according to the settings, as long the name has not been changed manually.
Cancel
Aborts the setup of the template and closes this dialog box without performing any further action.
Help
Shows this help text.
See also
