Magnetostatic Solver Settings

Before the magnetostatic solver can be started, several settings and definitions should be made. These settings are grouped on the ribbons to allow an easy and intuitive access.

Please refer also to the QuickStart Guide which guides you interactively through these steps.

Note: Several basic settings can be made in advance by selecting an application specific project template.

The solver can be started from the Magnetostatic Solver Dialog box that can be opened by choosing  Simulation: SolverStart Simulation .

The solver will produce a set of results that can be accessed from the navigation tree. In addition the template based postprocessing can be used to create further application specific results.

See also

Magnetostatic Solver Overview